Precautions before flushing self-loading concrete mixer truck accessories
Generally speaking, the accessories of the self-loading concrete mixer truck need to be maintained and maintained regularly. The accessories of the self-loading concrete mixer truck also need maintenance. In addition to maintenance and maintenance, it is the flushing of the accessories. Rinse the self-loading concrete mixer. The cycle of vehicle accessories is determined by the structure of the system and the degree of system contamination. If the filter medium sample has no or very few external contaminants, install a new oil filter, remove the flushing plate, and install the valve. So what should you pay attention to before flushing the self-loading concrete mixer truck accessories?
1. Make sure that no foreign contaminants, particles, debris, etc. enter the fuel tank from the vent cap of the fuel tank, the plug seat of the oil filter, the sealing gasket of the oil return pipe, and other openings in the fuel tank.
2. Check whether the hydraulic oil of the self-loading concrete mixer truck accessories is acidified or contaminated by other pollutants. The smell of the hydraulic oil can roughly identify whether it has deteriorated. If it goes bad it cannot be used again.
3. Repair leaks in the system. Avoid polluting the environment.
4. During the flushing process, check the oil filter of the self-loading concrete mixer truck accessories within 1 to 2 hours to prevent the oil filter from being blocked by pollutants.
5. Regularly flush the inlet oil filter of the oil pump
